Best Metal Cutting Blades for Miter Saws: Top Picks for Ferrous and Non-Ferrous Metals
The right metal cutting blade can dramatically improve cut quality, reduce wear, and boost productivity on miter and table saws. This guide spotlights five top-performing blades suited for cutting ferrous and non-ferrous metals, from steel and aluminum to stainless and iron. Each featured blade leverages carbide tips, optimized tooth geometry, and durable coatings to deliver fast, clean cuts with minimal heat and burrs. Use the selections below to compare performance, compatibility, and longevity for your specific cutting needs.
| Product | Brand | Key Benefit |
|---|---|---|
| JINSINA 10″ Miter Table Saw Blade | JINSINA | High-speed cutting with ATB tip design for smooth ferrous metal cuts |
| TOMAX 10-Inch 80 Tooth | TOMAX | Aluminum and non-ferrous metals with coated rust resistance |
| IVY Classic 40088 Swift Cut 10-Inch | IVY Classic | Durable resin-bonded grain for faster steel cutting |
| TOMAX 12-Inch 100 Tooth | TOMAX | Non-ferrous metal cutting with long blade life |
| FOXBC 10-Inch 100-Tooth | FOXBC | Low-noise, stable thinning for aluminum and non-ferrous metals |
JINSINA 10″ Miter Table Saw Blade

Product: JINSINA 10″ Miter Table Saw Blade, TCT Metal Cutting Saw Blades with 60T & 5/8″ Arbor
Brand: JINSINA
Key features: 10″ Tungsten Carbide Tipped blade with 60 teeth, 5/8″ arbor, runs up to 2500 RPM. Suitable for miter saws, slide miter saws, stationary table saws, and portable table saws. The ATB tip design alternates cutting teeth like small knives to reduce material resistance and load on equipment, enabling smoother cuts and improved efficiency. Premium carbide tips provide hardness and wear resistance for extended blade life.
TOMAX 10-Inch 80 Tooth TCG Blade

Product: TOMAX 10-Inch 80 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 5/8-Inch Arbor
Brand: TOMAX
Key features: Designed for cutting plastic, aluminum, and non-ferrous metals. Constructed with construction-grade carbide teeth for extended life. Electrophoretic coating minimizes rust and corrosion, aiding blade longevity and performance in challenging environments.
IVY Classic 40088 Swift Cut Blade

Product: IVY Classic 40088 Swift Cut 10-Inch x 3/32-Inch x 5/8-Inch Arbor
Brand: IVY Classic
Key features: Designed to cut steel, angle iron, sheet metal, and other ferrous metals. Resin-bonded aluminum-oxide grain enables faster cutting. Type 1 blade for cutting only. The blade is double reinforced with fiberglass mesh for durability and safety. Note: Not intended for high-speed saws.
TOMAX 12-Inch 100 Tooth Blade

Product: TOMAX 12-Inch 100 Tooth TCG Aluminum and Non-Ferrous Metal Saw Blade with 1-Inch Arbor
Brand: TOMAX
Key features: Optimized for cutting plastic, aluminum, and non-ferrous metals. Features construction-grade carbide teeth for longevity and an electrophoretic coating to reduce rust and corrosion, extending blade life and maintaining performance over time.
FOXBC 10-Inch 100-Tooth Blade

Product: FOXBC 10-Inch Saw Blade 100-Tooth TCG for Aluminum and Non-Ferrous Metal Cutting
Brand: FOXBC
Key features: 10″ blade with 100 teeth and a 5/8″ arbor. KERF of 0.095″ and laser-cut stabilizer vents to trap noise and reduce vibration for improved accuracy. Made from high-density tungsten carbide for toughness, wear resistance, and long blade life, suitable for thin to moderately thick aluminum cuts.
FOXBC 10-Inch 80-Tooth Blade

Product: FOXBC 10-Inch Saw Blade 80-Tooth TCG for Aluminum and Non-Ferrous Metal & Plastic Cutting
Brand: FOXBC
Key features: 10″ Miter/Table Saw Blade for metal cutting with 80 teeth. KERF 0.094″ and 5/8″ arbor. Laser-cut stabilizer vents help trap noise and reduce vibration, improving accuracy and durability. Constructed with high-density tungsten carbide for long life and resistance to wear.
Buying Guide: Key Purchase Considerations
- Material compatibility: Choose blades designed specifically for ferrous vs non-ferrous metals. Ferrous blades often have different tooth geometry and coatings to handle iron-containing metals, while non-ferrous blades prioritize clean finishes on aluminum and brass.
- Tooth count and geometry: Higher tooth counts produce smoother cuts but may slow down aggressive metal removal. ATB (Alternate Top Bevel) and TCG (Triple Chip Grind) designs balance speed, finish quality, and debris clearance for different metals.
- Arbor size and compatibility: Confirm your saw’s arbor diameter (commonly 5/8″ or 1″) and ensure the blade’s arbor matches your machine. Some blades include spacers or universal adaptors for compatibility.
- Coatings and coatings care: Electrophoretic coatings reduce rust and corrosion, extending blade life in humid environments or after exposure to coolants and oils.
- Durability features: Look for carbide-tipped teeth, fiberglass mesh reinforcement, and anti-vibration features to improve stability, reduce chatter, and minimize rework.
- Cut quality vs speed: Determine whether your priority is fast throughput or finest finish. For most metal fabrication tasks, a balance between tooth geometry and carbide hardness delivers reliable results.
- Safety and setup: Use blades designed for metal cutting and follow all saw manufacturer safety guidelines. Inspect blades for cracks or missing teeth before each use, and use proper floss or chip guards where provided.
- Maintenance: Keep blades clean of built-up burrs and coolants. Store blades dry to prevent corrosion and inspect for edge dulling or warping over time.
These selections represent blades optimized for metal cutting across a range of common applications, from lightweight aluminum work to steel and stainless tasks. Each option emphasizes carbide-tipped durability, robust design, and compatibility with standard 5/8″ arbors used on most miter saws and table saws. When selecting a blade, align the tooth count, grind type, and intended metal with your machine’s capability and the project’s finish requirements to achieve the best results.